ITU-ALARM-MIB DEFINITIONS ::= BEGIN
 
IMPORTS
   MODULE-IDENTITY, OBJECT-TYPE,
   Gauge32, mib-2
       FROM SNMPv2-SMI                -- [RFC2578]
   AutonomousType, RowPointer
       FROM SNMPv2-TC                 -- [RFC2579]
   SnmpAdminString
       FROM SNMP-FRAMEWORK-MIB        -- [RFC3411]
   alarmListName, alarmModelIndex,
   alarmActiveDateAndTime, alarmActiveIndex
       FROM ALARM-MIB                 -- [RFC3877]
   ItuPerceivedSeverity,
   ItuTrendIndication
       FROM ITU-ALARM-TC-MIB          -- [RFC3877]
   IANAItuProbableCause,
   IANAItuEventType
       FROM IANA-ITU-ALARM-TC-MIB     -- [RFC3877]
   MODULE-COMPLIANCE, OBJECT-GROUP
       FROM SNMPv2-CONF               -- [RFC2580]
   ZeroBasedCounter32
       FROM RMON2-MIB;                -- [RFC2021]
 
  ituAlarmMIB MODULE-IDENTITY
      LAST-UPDATED "200409090000Z"  -- September 09, 2004
      ORGANIZATION "IETF Distributed Management Working Group"
      CONTACT-INFO
           "WG EMail: disman@ietf.org
           Subscribe: disman-request@ietf.org
           http://www.ietf.org/html.charters/disman-charter.html
 
           Chair:     Randy Presuhn
                      randy_presuhn@mindspring.com
 
           Editors:   Sharon Chisholm
                      Nortel Networks
                      PO Box 3511 Station C
                      Ottawa, Ont.  K1Y 4H7
                      Canada
                      schishol@nortelnetworks.com
 
                      Dan Romascanu
                      Avaya
                      Atidim Technology Park, Bldg. #3
                      Tel Aviv, 61131
 
 
                      Israel
                      Tel: +972-3-645-8414
                      Email: dromasca@avaya.com"
      DESCRIPTION
              "The MIB module describes ITU Alarm information
              as defined in ITU Recommendation M.3100 [M.3100],
              X.733 [X.733] and X.736 [X.736].
 
              Copyright (C) The Internet Society (2004).  The
              initial version of this MIB module was published
              in RFC 3877.  For full legal notices see the RFC
              itself.  Supplementary information may be available on:
              http://www.ietf.org/copyrights/ianamib.html"
      REVISION    "200409090000Z"  -- September 09, 2004
      DESCRIPTION
          "Initial version, published as RFC 3877."
      ::= { mib-2 121 }
 
ituAlarmObjects OBJECT IDENTIFIER ::= { ituAlarmMIB 1 }
 
ituAlarmModel OBJECT IDENTIFIER ::= { ituAlarmObjects 1 }
 
ituAlarmActive  OBJECT IDENTIFIER ::= { ituAlarmObjects 2 }
 
ituAlarmTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF ItuAlarmEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "A table of ITU Alarm information for possible alarms
       on the system."
   ::= { ituAlarmModel 1 }
 
ituAlarmEntry OBJECT-TYPE
   SYNTAX      ItuAlarmEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Entries appear in this table whenever an entry is created
        in the alarmModelTable with a value of alarmModelState in
        the range from 1 to 6.  Entries disappear from this table
        whenever the corresponding entries are deleted from the
        alarmModelTable, including in cases where those entries
        have been deleted due to local system action.  The value of
        alarmModelSpecificPointer has no effect on the creation
        or deletion of entries in this table.  Values of
        alarmModelState map to values of ituAlarmPerceivedSeverity
        as follows:
 
 
          alarmModelState -> ituAlarmPerceivedSeverity
                 1        ->         clear (1)
                 2        ->         indeterminate (2)
                 3        ->         warning (6)
                 4        ->         minor (5)
                 5        ->         major (4)
                 6        ->         critical (3)
 
        All other values of alarmModelState MUST NOT appear
        in this table.
 
        This table MUST be persistent across system reboots."
   INDEX       { alarmListName, alarmModelIndex,
                ituAlarmPerceivedSeverity }
   ::= { ituAlarmTable 1 }
 
ItuAlarmEntry ::= SEQUENCE {
   ituAlarmPerceivedSeverity     ItuPerceivedSeverity,
   ituAlarmEventType             IANAItuEventType,
   ituAlarmProbableCause         IANAItuProbableCause,
   ituAlarmAdditionalText        SnmpAdminString,
   ituAlarmGenericModel          RowPointer }
 
ituAlarmPerceivedSeverity OBJECT-TYPE
   SYNTAX  ItuPerceivedSeverity
   MAX-ACCESS   not-accessible
   STATUS       current
   DESCRIPTION
            "ITU perceived severity values."
    REFERENCE
        "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
         ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
            Reporting Function', 1992"
    ::= { ituAlarmEntry 1 }
 
ituAlarmEventType OBJECT-TYPE
   SYNTAX       IANAItuEventType
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
            "Represents the event type values for the alarms"
    REFERENCE
        "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
         ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
 
 
            Reporting Function', 1992
         ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"
    ::= { ituAlarmEntry 2 }
 
ituAlarmProbableCause OBJECT-TYPE
   SYNTAX      IANAItuProbableCause
   MAX-ACCESS  read-write
   STATUS       current
   DESCRIPTION
            "ITU probable cause values."
    REFERENCE
        "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
         ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
            Reporting Function', 1992
         ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"
    ::= { ituAlarmEntry 3 }
 
ituAlarmAdditionalText OBJECT-TYPE
   SYNTAX  SnmpAdminString
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
            "Represents the additional text field for the alarm."
    REFERENCE
        "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
         ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
            Reporting Function', 1992"
    ::= { ituAlarmEntry 4}
 
ituAlarmGenericModel OBJECT-TYPE
   SYNTAX     RowPointer
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
   "This object points to the corresponding
    row in the alarmModelTable for this alarm severity.
 
    This corresponding entry to alarmModelTable could also
    be derived by performing the reverse of the mapping
    from alarmModelState to ituAlarmPerceivedSeverity defined
 
 
    in the description of ituAlarmEntry to determine the
    appropriate { alarmListName, alarmModelIndex, alarmModelState }
    for this { alarmListName, alarmModelIndex,
    ituAlarmPerceivedSeverity }."
   ::= { ituAlarmEntry 5 }
 
-- ITU Active Alarm Table --
 
ituAlarmActiveTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF ItuAlarmActiveEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "A table of ITU information for active alarms entries."
   ::= { ituAlarmActive 1 }
 
ituAlarmActiveEntry OBJECT-TYPE
   SYNTAX      ItuAlarmActiveEntry
   MAX-ACCESS  not-accessible
   STATUS      current
   DESCRIPTION
       "Entries appear in this table when alarms are active.  They
       are removed when the alarm is no longer occurring."
   INDEX       { alarmListName, alarmActiveDateAndTime,
                alarmActiveIndex }
   ::= { ituAlarmActiveTable 1 }
 
ItuAlarmActiveEntry ::= SEQUENCE {
    ituAlarmActiveTrendIndication       ItuTrendIndication,
    ituAlarmActiveDetector              AutonomousType,
    ituAlarmActiveServiceProvider       AutonomousType,
    ituAlarmActiveServiceUser           AutonomousType
    }
 
ituAlarmActiveTrendIndication OBJECT-TYPE
   SYNTAX      ItuTrendIndication
   MAX-ACCESS  read-only
   STATUS       current
   DESCRIPTION
            "Represents the trend indication values for the alarms."
    REFERENCE
        "ITU Recommendation M.3100, 'Generic Network Information
            Model', 1995
         ITU Recommendation X.733, 'Information Technology - Open
            Systems Interconnection - System Management: Alarm
            Reporting Function', 1992"
    ::= { ituAlarmActiveEntry 1 }
 
 
 
ituAlarmActiveDetector OBJECT-TYPE
   SYNTAX AutonomousType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Represents the SecurityAlarmDetector object."
    REFERENCE
        "ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"
   ::= { ituAlarmActiveEntry 2 }
 
ituAlarmActiveServiceProvider OBJECT-TYPE
   SYNTAX AutonomousType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Represents the ServiceProvider object."
    REFERENCE
        "ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"
   ::= { ituAlarmActiveEntry 3 }
 
ituAlarmActiveServiceUser OBJECT-TYPE
   SYNTAX AutonomousType
   MAX-ACCESS read-only
   STATUS current
   DESCRIPTION
      "Represents the ServiceUser object."
    REFERENCE
        "ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"
   ::= { ituAlarmActiveEntry 4 }
 
-- Statistics and Counters
 
ituAlarmActiveStatsTable  OBJECT-TYPE
      SYNTAX  SEQUENCE OF ItuAlarmActiveStatsEntry
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
         "This table represents the ITU alarm statistics
         information."
  ::= { ituAlarmActive 2 }
 
 
 
 
ituAlarmActiveStatsEntry OBJECT-TYPE
      SYNTAX  ItuAlarmActiveStatsEntry
      MAX-ACCESS  not-accessible
      STATUS  current
      DESCRIPTION
         "Statistics on the current active ITU alarms."
      INDEX   { alarmListName }
 
  ::= {  ituAlarmActiveStatsTable 1 }
 
ItuAlarmActiveStatsEntry ::=
 SEQUENCE {
   ituAlarmActiveStatsIndeterminateCurrent Gauge32,
   ituAlarmActiveStatsCriticalCurrent      Gauge32,
   ituAlarmActiveStatsMajorCurrent         Gauge32,
   ituAlarmActiveStatsMinorCurrent         Gauge32,
   ituAlarmActiveStatsWarningCurrent       Gauge32,
   ituAlarmActiveStatsIndeterminates       ZeroBasedCounter32,
   ituAlarmActiveStatsCriticals            ZeroBasedCounter32,
   ituAlarmActiveStatsMajors               ZeroBasedCounter32,
   ituAlarmActiveStatsMinors               ZeroBasedCounter32,
   ituAlarmActiveStatsWarnings             ZeroBasedCounter32
 }
 
ituAlarmActiveStatsIndeterminateCurrent OBJECT-TYPE
   SYNTAX      Gauge32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the current number of active alarms with a
        ituAlarmPerceivedSeverity of indeterminate."
   ::= { ituAlarmActiveStatsEntry 1 }
 
ituAlarmActiveStatsCriticalCurrent OBJECT-TYPE
   SYNTAX      Gauge32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the current number of active alarms with a
        ituAlarmPerceivedSeverity of critical."
   ::= { ituAlarmActiveStatsEntry 2 }
 
ituAlarmActiveStatsMajorCurrent OBJECT-TYPE
   SYNTAX      Gauge32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the current number of active alarms with a
 
 
        ituAlarmPerceivedSeverity of major."
   ::= { ituAlarmActiveStatsEntry 3 }
 
ituAlarmActiveStatsMinorCurrent OBJECT-TYPE
   SYNTAX      Gauge32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the current number of active alarms with a
        ituAlarmPerceivedSeverity of minor."
   ::= { ituAlarmActiveStatsEntry 4 }
 
ituAlarmActiveStatsWarningCurrent OBJECT-TYPE
   SYNTAX      Gauge32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the current number of active alarms with a
        ituAlarmPerceivedSeverity of warning."
   ::= { ituAlarmActiveStatsEntry 5 }
 
ituAlarmActiveStatsIndeterminates OBJECT-TYPE
   SYNTAX      ZeroBasedCounter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the total number of active alarms with a
        ituAlarmPerceivedSeverity of indeterminate since system
        restart."
   ::= { ituAlarmActiveStatsEntry 6 }
 
ituAlarmActiveStatsCriticals OBJECT-TYPE
   SYNTAX      ZeroBasedCounter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the total number of active alarms with a
        ituAlarmPerceivedSeverity of critical since system restart."
   ::= { ituAlarmActiveStatsEntry 7 }
 
ituAlarmActiveStatsMajors OBJECT-TYPE
   SYNTAX      ZeroBasedCounter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the total number of active alarms with a
        ituAlarmPerceivedSeverity of major since system restart."
   ::= { ituAlarmActiveStatsEntry 8 }
 
 
ituAlarmActiveStatsMinors OBJECT-TYPE
   SYNTAX      ZeroBasedCounter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the total number of active alarms with a
        ituAlarmPerceivedSeverity of minor since system restart."
   ::= { ituAlarmActiveStatsEntry 9 }
 
ituAlarmActiveStatsWarnings OBJECT-TYPE
   SYNTAX      ZeroBasedCounter32
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
       "A count of the total number of active alarms with a
        ituAlarmPerceivedSeverity of warning since system restart."
   ::= { ituAlarmActiveStatsEntry 10 }
 
-- Conformance
 
ituAlarmConformance OBJECT IDENTIFIER ::= { ituAlarmMIB 2 }
ituAlarmCompliances  OBJECT IDENTIFIER ::= { ituAlarmConformance 1 }
 
ituAlarmCompliance MODULE-COMPLIANCE
   STATUS  current
   DESCRIPTION
          "The compliance statement for systems supporting
          the ITU Alarm MIB."
   MODULE -- this module
       MANDATORY-GROUPS {
           ituAlarmGroup
           }
   GROUP       ituAlarmServiceUserGroup
       DESCRIPTION
           "This group is optional."
   GROUP       ituAlarmSecurityGroup
       DESCRIPTION
           "This group is optional."
   GROUP       ituAlarmStatisticsGroup
       DESCRIPTION
           "This group is optional."
  ::= { ituAlarmCompliances 1 }
 
ituAlarmGroups OBJECT IDENTIFIER ::= { ituAlarmConformance 2 }
 
ituAlarmGroup OBJECT-GROUP
 OBJECTS {
           ituAlarmEventType,
 
 
           ituAlarmProbableCause,
           ituAlarmGenericModel
         }
 STATUS   current
 DESCRIPTION
               "ITU alarm details list group."
 ::= { ituAlarmGroups 1}
 
ituAlarmServiceUserGroup OBJECT-GROUP
 OBJECTS {
           ituAlarmAdditionalText,
           ituAlarmActiveTrendIndication
         }
 STATUS current
 DESCRIPTION
         "The use of these parameters is a service-user option."
 ::= { ituAlarmGroups 2 }
 
ituAlarmSecurityGroup OBJECT-GROUP
  OBJECTS {
          ituAlarmActiveDetector,
          ituAlarmActiveServiceProvider,
          ituAlarmActiveServiceUser
         }
  STATUS current
  DESCRIPTION
         "Security Alarm Reporting Function"
    REFERENCE
        "ITU Recommendation X.736, 'Information Technology - Open
            Systems Interconnection - System Management: Security
            Alarm Reporting Function', 1992"
  ::= { ituAlarmGroups 3 }
 
ituAlarmStatisticsGroup OBJECT-GROUP
  OBJECTS {
         ituAlarmActiveStatsIndeterminateCurrent,
         ituAlarmActiveStatsCriticalCurrent,
         ituAlarmActiveStatsMajorCurrent,
         ituAlarmActiveStatsMinorCurrent,
         ituAlarmActiveStatsWarningCurrent,
         ituAlarmActiveStatsIndeterminates,
         ituAlarmActiveStatsCriticals,
         ituAlarmActiveStatsMajors,
         ituAlarmActiveStatsMinors,
         ituAlarmActiveStatsWarnings
          }
  STATUS current
  DESCRIPTION
 
 
    "ITU Active Alarm Statistics."
  ::= { ituAlarmGroups 4 }
 
END